The Plano is our newest radiator. At the beginning of 2015, we began its serial production. The Plano
radiator is the answer to the market’s need for a hygienic and clean radiator. With its straight and
closed profile on the front and back sides, it features an elegant and refined design. Thanks to its
straight profile, maintaining and cleaning it is simple because there are no surfaces that retain dust.
Hence it is ideal for areas that require high hygienic standards such as hospitals, medical clinics as
well as areas where persons that are sensitive to dust reside.
Being elegant and unobtrusive, it blends well into a modern interior.
In addition to the Plano, a special product line of the Plano+ has also been developed that allows connections in installation running from walls or floors. The Plano and Plano+ products come in 3 sizes: Plano 700, Plano 600 and Plano 350 with a standard depth of 90 mm for all radiator heights.
The Plano 350 is the lowest of the Plano radiators and is intended for areas where restrictions on the height of a radiator exist, such as attic areas, glass partitioning and the like. The connection interval is 350 mm, with a total height of 426 mm and depth of 80 mm. It can be joined to and combined with the Plano 350+, where the connection can be either from the floor or wall, and on the left or right side of the radiator. Furthermore, it can also be set up with the Plano DV 350 in any position in a radiator section.
The Plano 500 is a medium-sized radiator that can be installed in any area. Due to its decent appearance, it blends well into various interior designs, from the modern to classical. The connection interval is 500 mm, with a total height of 576 mm and depth of 80 mm. It can be joined to and combined with the Plano 500+, where the connection can be either from the floor or wall, and on the left or right side of the radiator. Furthermore, it can also be set up with the Plano DV 500 in any position in a radiator section.
Thanks to its straight profile and hygienic characteristics, buyers have come to recognise the Plano 600, as an increasingly common choice for bedrooms, living rooms and the like. It heats any area quickly, and is exceptionally simple to maintain. The connection interval is 600 mm, with a total height of 676 mm and a depth of 80 mm. It can be joined to and combined with the Plano 600+, where the connection can be either from the floor or wall, and on the left or right side of the radiator. Furthermore, it can also be set up with the Plano DV 500 in any position in the radiator section.
For the Plano 700 radiator the saying goes “less is more”, because this radiator exhibits all its beauty through its particular size. The elegance of the Plano is fully exhibited in this high-style radiator. The connection interval is 700 mm, with a height of 776 mm and a depth of 80 mm. It can be joined to and combined with the Plano 700+, where the connection can be either from the floor or wall, and on the left or right side of the radiator. Furthermore, it can also be set up with the Plano DV 500 in any position in the radiator section.
Cijene su bez PDV- a, informativnog karaktera.
Za sve ostale detalje molimo da se obratite u službu prodaje, tel. 044/569-130.
1. Da je proizvod izrađen u skladu sa propisima Europske norme E 442 koja regulira tehničke specifikacije i zahtjeve za radijatore i izmjenjivače topline te da će radijatori Lipovica besprijekorno raditi u garancijskom roku pod uvjetom da se koristi u skladu s njegovom namjenom i uputama za montažu , rad i održavanje.
2. Da ćemo na Vaš zahtjev, u dogovoru sa Vama, besplatno otkloniti eventualni nedostatak na proizvodu u najkraćem mogućem roku od trenutka prijave kvara.
3. Garancija neće vrijediti u sljedećim slučajevima:
- Ako se ne pridržava uputa za montažu, rad i održavanje
- Ako se prilikom montaže koriste neoriginalni rezervni dijelovi i pribor
- Za kvarove i oštećenja nastala zbog nestručnog i nebrižljivog rukovanja sa proizvodom
- Ako nije priložen potvrđen garancijski list, kao i račun o kupnji proizvoda.
4. Kupac može reklamaciju prijaviti neposredno prodavaču prilikom kupnje ili proizvođaču nakon ugradnje odnosno početka rada u garancijskom roku od 20 godina.
Za ugrađeni ventilski sklop na radijatorima Orion + i Plano + jamstvo je 18 mjeseci.
- Reduction coupler
- Console ORION/Plano
- Legs Plano
Each Orion+, Solar+ or Plano+ radiator comprises two appro- priate radiator columns which have stop valves. The stop valves allow the radiators to be connected to or disconnected from the heating installation, and with the aid of the respective transitional piece, i.e. fitting, they can be connected to all types of two-piping installations. The interval between the outlet and inlet is 80 mm. The outlet is the external column, the inlet is the internal column. The construction itself allows optimal distancing of the ra- diator from the wall or floor. Located in the upper radiator hub is a mountable valve which due to its construction pro- vides balancing of the system and very precise manual or automatic regulation of water flow through the radiator. Automatic regulation is achieved by an installed thermostat head on the mountable valve. Solar+, Orion+ and Plano+ ra- diators feature simple mounting and dismounting onto the respective type of radiator. This requires two ordinary ra- diator connectors equipped with seals allowing the Solar+, Orion+ and Plano+ radiators to be connected to standard Solar, Orion and Plano radiators. The standard section is always added to the mounted valve. For the optimal use of the Solar+, Orion+ and Plano+radiators, it is recommended that the thermostat head be installed on the mountable valve. Note that only the Danfos thermostat head can be installed on the mountable valve. For the + type radiators as with the other radiators from the Lipovica assortment, a 20-year guarantee is given for radiators provided that the installation is carried out by a professional and that the heating system is used in the pro- per manner. The installed valve assembly has an 18-month guarantee. It is recommended that both sectional stop val- ves not be closed for longer periods of time due to a possible increase in pressure in the sections caused by thermal dila- tations which may lead to undesirable effects (cracks in the sectional columns).